Live statistics on documentation found and knowledge extracted by the robots, now available in the MCP server. Documentation coverage is expressed as the percentage of ca.gov's Solar Equipment List, which agents sync with daily and then research.
BUS balance hardware Fault: Internal components failed.
Please contact your installer
Fault behaviours documented
Fault behaviours count
Fault behaviours samples
Manufacturer
Type
Marketing name
Model
Behaviour
Meaning
Recommended action
EG4 Electronics LLC
Solar batteries
EG4 LifePower4
SR-48-100-LP4-IN-02
No DC output
Open breaker, or battery voltage is too low.
Check battery breaker and/or charge the battery
OutBack Power
String inverters
SkyBox True Hybrid Energy System
SBX5048-120/240 {240V}
Low charge rate
High loads
If total loads and charging exceed the AC input and PV sources, the charge rate decreases to give priority to the loads. Turn off some loads and test the charging rate again
PYLON TECHNOLOGIES CO.,LTD
Solar batteries
APstorage PCS
US3000C
Buzzer rings and ALM solid red
MOSFAIL.
Power off all battery and inverters; Disconnect breaker; Check the cable connection and disconnect all power cables; Check the power port damaged or not; Check the setting of inverter or charger, check the communication between inverter and battery system; Try turn on the single module, without any cable connected; If still buzzer rings. Then switch off the module and contact your local distributor